Home >  2015 Promotion
  • Clearance Sale: 6-holes bur disinfection box resistant to high temperature and pressure


  • Clearance Sale: TR401-SPR NSK 45 Degree Single Water Spray Push Button high speed handpiece, Standard Head,4hole


  • Clearance Sale: TR401-SPR TREE 45 Degree Single Water Spray Push Button high speed handpiece, Standard Head,4hole


  • Clearance Sale: SEA-C3-1-TP NSK Triple Water Spray Push Button High Speed Handpiece,Line Handle Design,Torque Head,4hole


  • Clearance Sale: TR-810 Luxury Comfortable Dental Medical Doctor Stools,Black color


  • JSUT $20! COLOR-C1-1-P Colorful Single Water Spray Push Button high speed handpiece,Six color for choose


  • JUST $150/SET!TR-X02 New Portable Manual Dental X Ray Film Develop Darkroom Processor Developer in Darkroom


  • Clearance Sale: TR405-TP KAVO Single Water Spray Push button High Speed Handpiece,with Kavo compatible Bearing, Standard Head,4hole


  • JUST $1350/SET!RAY68(S) Runyes Wall Mounted X-ray Machine Unit Wall-hanging Type

JUST $1350/SET!RAY68(S) Runyes Wall Mounted X-ray Machine Unit Wall-hanging Type

  • Model: RAY68(S)
  • Brands:TREE
  • Start from: 1 Unit(s)
  • Price:

    subtotal: ×+(shipping fee)=
    Qty.Range(unit) Price(per unit) Discount
    1 0 No

    Estimite Shipping Fee

  • Weight:32kg
  • Calculating ......
  • 0  (Cost and Freight)
    Quantity: Unit(s)


      Size: 38cm*91cm*37cm

      G.W: 31.8kg



      Wall mounted X-ray Machine TR-RAY68(S)

      Commodities parameters



      AC 220V  ±10%


      50/60 Hz

      X-ray plugs

      GB 3 cores/EN 3 cores

      Max power consumption

      900 VA

      Electric current

      4 A


      6.3 A


      0.8 mm

      Tube voltage

      70KV ±10%

      Anodic electric


      7mA  ±15%

      Anodic angle


      Load circle


      Half-value layer

      70 KV,If 1.6mm AL

      Inherent Filtration

      ≥0.5 mm AL

      Leaking radiation rate

      1m < 0.007mGy/h

      The smallest focus (0.8mm)  in the tube-head makes the images clearer and reduces the X-ray dose by 16-20 times compared with any other products in domestic market. The leaking radiation rate around 1m from focus is close to 0, and the head window is made of 1.5mm aluminum to filter X-ray. As a result, the health of patients and doctors can be protected better.

      1. Adopt imported assembled X-ray generator
      2. Precise time control: microprocessing can make the exposure time accurate to 1/100 second and display in digital. The machine will replay to any warm immediately.
      3. The French imported balance arm make the location flexible and stable.
      4. The column is made of aluminium alloy,modern and refined design
      5. Parallel focus, contributing to get the super clear image easily
      6. With almost no radiation, it's safe to operate: tiny X ray source and the ball sleeve is tightly sealed. On the condition of opened exposure, around 1 meter from exposure center, its ray leakage lower than national standards by 68 times, more than the prescribed body safety value of 0.5mGy / h is lower (0-0.007mGy / h ). So without X-ray protection room, doctors and patients can be protected well,too.
      7. with error code display function, parameters can be reset and saved
      8. Voltage stabilizer as standard collocation, preventing the damage from voltage hunting, which can pretend the service life of this machine.
      9. Reserved digital camera mode, which can upgrade to digital developing machine

      Recommended test after installation:
      1. Start the power switch then check the green indicating lamp of system ready status if it is working normally.
      2. Choose any exposure time and adjust the position of tube head is good for patient and operator
      3. Push the manual switch when you are far from device and check if the yellow X ray indicating lamp is on and buzzer is ringing during exposure
      4. When you push the exposure button on the control panel the timer will ring 4 times to indicate the timer is normal
      5. To adjust the good position of tube head, you can do following adjustments if necessary:
         Adjust the tube head's tightness by rotating the horizontal axes.
         Adjust the tightness of spring of rotating arm
         Adjust the frame position a little

      1. There should be enough space for operation around the device
      2. Please watch your hand during operation or adjust the position
      3. If the tube head is obsolete please send to professional recycle company according to the law
      4. Don't stand or put any thing on the pedestal of X-ray unit

      The warranty for this product is one-year from the day you purchase this product. The warranty of the tube head is 5 years. During this period, any problem under normal usage circumstance and obey the operation manual,our company will be responsible for giving free maintain.
      1. Provide free customer guidance by experts
      2. Provide free parts during warranty
      3. Provide free solutions and technical support during warranty
      4. Promise 24 hours Q&A system, and provide solution within 3 days
      5. Powerful after-sale service group, technician will provide door-to-door service if product

        Indicates required fields*
        Your Name: *
        Enter your Reviewer Nickname
        Your Email: *
        Identifying Code: *

      for Wholesale

      about the latest offers and deals Subscribe today!

      HACKER SAFE certified sites prevent over 99.9% of hacker crime. treedental.com Partners treedental.com Partners
      Payment Options

      Copyright 2012. All Rights www.e-treedental.com Reserved.